Safety Hub — Overview
The safety console — a KPI strip, a needs-attention feed, quick actions, and the 8-week incident trend, all scoped to your project.
The Safety Hub is a fixed, purpose-built console — not a customisable widget grid. It answers one question the moment you open it: what needs my attention right now?
The KPI Strip
Four at-a-glance numbers across the top:
| KPI | What It Counts | Tone |
|---|---|---|
| Open incidents | Incidents that aren't closed | Bad when above zero |
| Active permits | Currently active permits (with overdue flagged) | Neutral / attention |
| Talks this week | Toolbox talks delivered in the last 7 days | Good |
| Open walk findings | Unresolved observations across walks | Attention |
The Needs-Attention Feed
The heart of the Hub. It groups the things you should act on by urgency:
- Critical — open incidents
- Warning — permits expiring soon (with the exact time), open walk findings
- Info — permits pending approval, talks awaiting sign-off
Every row is a deep link — tap it to jump straight to the record. When there's nothing outstanding, the feed shows an "All clear" message.
Work top-down
The feed is ordered by urgency. Clearing it top-to-bottom means you always handle the highest-risk items first.
Quick Actions
A row of one-tap capture buttons — Log talk, Start walk, Request permit, Report incident — each opens the matching capture flow with the form already open. There's also a link to permit Templates.
The Incident Trend
An 8-week line chart of incident counts, so you can see whether things are trending up or down. If there were no incidents in the window, it shows a "no incidents recorded" note.
On a Phone
The mobile Hub keeps the KPI strip and quick actions and adds a set of section chips (Toolbox Talks, Safety Walks, Permits, Incidents) so you can jump into any list with one tap.
Next Steps
- Toolbox Talks — deliver and sign off briefings
- Safety Walks — log observations on the move
- Permits to Work — authorise hazardous work
- Incidents — report and investigate